Specifications
62
5· Once you are inside the “DEVICE Conguration” please check the following points:
•“Hard disk” should be connected at SATA0
•“CD-ROM” should be connected at SATA1
If everything is OK, press ESC to return the Main menu.
If Hard disk or CD-ROM or Both are not detected, we should check the PC connections.
(Do this work with the PC unplugged from power).Go to step 8
6· Once you are inside the “Boot Order” please check the following points:
•“ATAPI CD-ROM”
•“Hard Drive”
If ATAPI CD-ROM or Hard Drive or Both are not detected, we should check the PC
connections.(Do this work with the PC unplugged from power).Go to step 8