Specifications

4· With the Keyboard arrows, move up to

the Advanced Menu. And then, move

down, to the “IDE Conguration” and

press Enter.

HARD DRIVE ERROR

11.2 HARD DRIVE

This procedure is to check if the BIOS settings are correct for an Automatic

BOOT-DVD.

WARNING!!! This procedure is very dangerous and could cause a PC

Malfunction. Please read it carefully and follow all steps one by one.

1· Plug in a Keyboard to the PC.

2· Turn ON the PC (or the whole Photo Booth).

3· When the ASRock screen appears, press “F10” several times until the “BIOS

SETUP UTILITY” appears on the screen. If it does not come up, and the

software continues uploading, then go back to the Step 2.