Specifications

57
· SOUND PROBLEMS
Problem
The sound does not work
Causes
The volume is not correct.
The conguration menu has the sound set to OFF.
Solutions
Adjust the volume with the control placed below the test,
free-play and start buttons.
Change the sound conguration from the test menu
(black button).
· PRINTER PROBLEMS
Problem
The printer does not print any
photos
Causes
The printer is disconnected.
The printer is out of ink or paper.
The paper or the ink sheet was not
properly installed.
Incorrect paper.
USB/ LPT Dallas Chip position is
incorrect.
Solutions
Switch on the printer.
Call the person in charge
Correctly place the paper
and the ink.
Use only CK9550-DC type paper.
Problem
The printer does not switch on
Causes
The printer is disconnected.
The printer does not receive electric
supply.
Solutions
Connect the printer.
Be sure that the cable is correctly
connected.
Problem
It prints one or more white lines
Causes
Thermal head is broken.
Solutions
Replace thermal head.
· PC PROBLEMS
Problem
Install a brand new Control Board
with Atmel and jumpers.
Causes
This problem is due a hardware
malfunction.
Check the green Capture Board, as
it is probably out or half way in.
Solutions
Turn OFF the PC.
Take out the Capture Board. And put
it again (all the way in).
Screw hard and check again that it is
all the way in, and did not move little
out during screwing.
Turn ON the PB and check it.