Specifications

27
When the manual feed & cut mode has been
selected, hold down the FEED & CUT button for 1
second or longer. Repeat the manual feed & cut
three times. When the print paper with the
postcard printing on its reverse side is installed,
repeat this procedure ve times.
For how to select the auto feed & cut mode, see
“Setting of the DIP switches”
Cleaning
Cleaning as indicated below will help maintain stable
printer operation and extend the printer’s life.
Preparations:
Alcohol (isopropyl alcohol)
Tissue paper (Fold in half about four times, and use the
folded side to clean.)
Other : Cleaner pen (option)*, Cleaning ribbon (option)*
* Please ask the dealer about options.
PREPARATIONS FOR CLEANING
1 Press the POWER button to turn on the power.
2 Press the DOOR OPEN button to open the door.
3 Remove the ink cassette.
4 Take out the print paper.
5 Press the POWER button to turn off the power.
Make sure to turn off the power before cleaning.
THERMAL HEAD CLEANING
Clean the heat-generating part below the thermal head.
Wipe the head cleaning part carefully with tissue paper
dampened with a small amount of alcohol.
NOTE
· Do not damage the thermal head.
· When the poor print quality is not corrected even
if the head has been cleaned, replacement of the
thermal head may be required. Contact your
dealer.