Specifications

25
When the manual & cut mode has been selected
When the manual feed & cut mode has been selected, hold down the FEED & CUT
button for 1 second or longer. Repeat the manual feed & cut three times. When the print
paper with the postcard printing on its reverse side is installed, repeat this procedure ve
times.
To select the auto feed & cut mode, see “Setting of the DIP switches”
Installation of the print paper and the ink ribbon is completed.
NOTE
· Make sure to replace the print paper and the ink ribbon at the same time.
· When replacing them, throw away the paper chips in the paper strip bin.
Error Messages & Countermeasures
OVERCOMING PAPER JAMS
1· Press the DOOR OPEN button to open the door.
Make sure that the power is turned on before
opening the door.
If the door does not open, turn off the power and
turn it on again.
Then press the DOOR OPEN button again