Specifications

Before Operation

Remove the sticker, insert the print paper between the rollers as shown above, and feed

the print paper until it reaches the black cover.

Remove the sticker before inserting the print paper between rollers. Make sure to insert

the paper straight.

NOTE

· Keep the roller clean.

· Dirt on the roller may degrade the print quality.

NOTE

· When taking the print paper out, pull it up toward you.

· Make sure to turn on the power before replacing the print paper.

· Make sure to eliminate any slack from the print paper. If you carry out the following

steps without eliminating the slack, the print paper may be damaged.

INSTALLATION OF INK RIBBON

INSTALLING THE INK RIBBON

After installing the print paper, load the ink ribbon in the ink cassette.

Then install the ink cassette into this unit.

NOTE

· Place the ink cassette on a at surface, when loading the ink ribbon.

· Select a place that is free of dust when loading the ink ribbon. Dust or dirt settling on

the ink ribbon results in poor print quality.

· Make sure that the shafts of the ink ribbon t into the ink cassette rmly.

Roller

Black cover

Print paper