User manual

2323
2323
23
connect to the SATA HDD
power connector
connect to the
power supply
Serial ATA (SATA) Please connect the black end of
Power Cable SATA power cable to the power
(Optional) connector on each drive. Then
connect the white end of SATA
power cable to the power
connector of the power supply.
USB 2.0 Header ASRock eSATAII I/O accommo-
(9-pin USB67) dates 4 default USB 2.0 ports. If
(see p.10 No. 15) those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
USB 2.0 Header ASRock eSATAII I/O accommo-
(9-pin USB45) dates 4 default USB 2.0 ports. If
(see p.10 No. 16) those USB 2.0 ports on the I/O
panel are not sufficient, this
USB 2.0 header is available to
support 2 additional USB 2.0
ports.
Infrared Module Header This header supports an
(5-pin IR1) optional wireless transmitting
(see p.10 No. 21) and receiving infrared module.
Internal Audio Connectors This connector allows you
(4-pin CD1) to receive stereo audio input
(CD1: see p.10 No. 26) from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
CD-R
GND GND
CD-L
CD1
USB_PWR
USB_PWR
P+5
P-5
P+4
P-4
GND
GND
D UMMY
1
USB_ P WR
USB_ P WR
P +7
P-7
P +6
P-6
GND
GND
D U MMY
1
1
IRTX
IRRX
GND
+5VSB
DUMMY
Front Panel Audio Header This is an interface for front
(9-pin HD_AUDIO1) panel audio cable that allows
(see p.10 No. 28) convenient connection and
control of audio devices.
J_SENSE
OUT2_L
1
MIC _RET
P R ESENCE#
GND
OUT2_R
MIC 2_R
MIC 2_L
OUT_R ET