User manual

3434

Good Night LED

Enable this option to turn off Power LED and Lan LED when the system is

power on. The keyboard LED will also be turned off in S1, S3 and S4 state.

The default value is [Disabled].

Overclock Mode

Use this to select Overclock Mode. Configuration options: [Auto], [Manual]

and [Optimized]. The default value is [Auto]. If you select [Manual], Untied

Overclocking function is enabled. Please refer to page 30 for the

details of Untied Overclocking Technology. Therefore, you are allowed to

adjust the Host frequency and PCIE frequency in the following two items.

BCLK Frequency (MHz)

Use this option to adjust BCLK (Internal Base Clock) frequency.

Boot Failure Guard

Enable or disable the feature of Boot Failure Guard.

Boot Failure Guard Count

Enable or disable the feature of Boot Failure Guard Count.

Spread Spectrum

This item should always be [Auto] for better system stability.

CPU Ratio Setting

If the ratio status is unlocked, you will find this item appear to allow you

changing the ratio value of this motherboard.

IGD Frequency

Use this option to adjust IGD frequency.

QPI Frequency

Use this option to adjust QPI frequency.

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s)

inserted and assigns appropriate frequency automatically.