User manual

ManualsBrandsASROCK ManualsMotherboardsG41MH-GE

3737

BIOS SETUP UTILITY

Chipset Settings

DRAM Frequency

Strap FSB to MCH

Flexibility Option

DRAM tCL

DRAM tRCD

DRAM tRP

DRAM tRAS

DRAM tRFC

DRAM tWR

DRAM tWTR

DRAM tRRD

DRAM tRTP

DRAM CH0 RCOMP ODT

DRAM CH1 RCOMP ODT

DRAM CH0 tRD

DRAM CH1 tRD

[Auto]

[Disabled]

[Auto]

Select Screen

Select Item

+ - Change Option

F1 General Help

F10 Save and Exit

ESC Exit

F9 Load Defaults

Advanced

Standard Memory Info : 5-5-5-18-42-6-3-3-3

Advanced Memory Info : 18-18-3-3-0-0

3.4.23.4.2

3.4.2

Chipset ConfigurationChipset Configuration

Chipset Configuration

DRAM Frequency

If [Auto] is selected, the motherboard will detect the memory module(s) in-

serted and assigns appropriate frequency automatically. You may select

[333MHz (DDR2 667)], [400MHz (DDR2 800)] or [533MHz (DDR2 1066)]. The

configuration options depend on the CPU and memory module you adopt on

this motherboard. Please refer to page 8 for the CPU FSB frequency and its

corresponding memory support frequency.

Strap FSB to MCH

Use this item to strap FSB to MCH. Configuration options: [Auto], [1066] and

[1333]. The configuration options depend on the CPU you adopt. The

default value is [Auto].

Flexibility Option

The default value of this option is [Disabled]. It will allow better tolerance for

memory compatibility when it is set to [Enabled].

DRAM tCL

Use this item to adjust the means of memory accessing. Configuration

options: [3], [4], [5], [6], [7] and [Auto].

DRAM tRCD

This controls the number of DRAM clocks for TRCD. Configuration options:

Configuration options: [Auto], [3] to [10].

DRAM tRP

This controls the number of DRAM clocks for TRP. Configuration options:

Configuration options: [Auto], [3] to [10].

DRAM tRAS

This controls the number of DRAM clocks for TRAS. Configuration options:

Configuration options: [Auto], [9] to [24].