Installation guide
EPC612D8T Series
5
English
is motherboard supports Wake from on Board LAN. To use this function, please make
sure that the “Wake on Magic Packet from power o state” is enabled in Device Manager
> Intel® Ethernet Connection > Power Management. And the “PCI Devices Power On” is
enabled in UEFI SETUP UTILITY > Advanced > ACPI Conguration. Aer that, onboard
LAN1&2 can wake up S5 under OS.
If you install Intel® LAN utility, Marvell SATA utility or Realtek HD audio driver, this
motherboard may fail Windows® Hardware Quality Lab (WHQL) certication tests. If you
install the drivers only, it will pass the WHQL tests.
1. About the setting of “Hyper reading Technology”, please check page 55.
2. Due to Intel® CPU spec denition, please install the memory modules on DDR3_A1,
DDR3_B1, DDR3_C1 and DDR3_D1 for the rst priority. If above four DDR3 DIMM
slots are fully installed, and you want to use more than four memory modules, please
install the other memory modules from le to right (from DDR3_A2, DDR3_B2, DDR3_
D2 to DDR3_C2.)
3. Before you implement Quad Channel Memory Technology, make sure to read the instal-
lation guide of memory modules on page 25 for proper installation.