User guide

1.3 Web Interface Configuration (Client)

Note: The Java application is required to use the management system. Please download and install

the Java application on your laptop (client) before using the IPMI management.

1. Go to the “Local Area Connection” on your laptop to configure the client’s TCP/IP settings.

In the “Local Area Connection Properties” window, select Networking > Internet Protocol Version

4(TCP/IPv4) > Properties. Then assign the IP address.

Configuration Example:

IP address = [192.168.3.77]

Subnet mask = [255.255.255.0]

2. Then you can check if your connection is working properly by running the Ping (Packet InterNet

Grouper) command. Click Start, enter “cmd”(cmd.exe) into the search field, and type [ping <IP

address>].

Configuration Example:

ping 192.168.3.1