User guide

3.5.18 System and Audit Log Settings

This page is used to configure the System and Audit log settings.

System Log

Check the option ‘Enable’ to enable system logs.

Log Type

Select the Log type for system logs, whether it should be preserved in a local file or on a remote

server. Local file resides at /var/log/.

File Size

If Local log is selected, specify the size of the file in bytes.

• - Size ranges from 3 to 65535.

Rotate Count

When logged information exceeds the specified file size, the old log information automatically gets

moved to backup files based on the rotate count value. If the rotate count is zero, the old log

information gets cleared permanently each time.

• - Value ranges from 0 to 255.

Server Address

Specify the remote server address to log system events. The server address will support the following:

• - IP Address (Both IPv4 and IPv6 format).

• - FQDN (Fully qualified domain name) format.

Audit Log

Check the option 'Enable' to enable audit log.

Save

Click 'Save' to save the configured settings.

Reset

Click 'Reset' to reset to the previously saved values.