User guide

configured slot.

Delete

Select the desired configured slot to be deleted and click ‘Delete’.

3.5.13 RADIUS Settings

To enable/disable RADIUS, check or uncheck the “RADIUS Authentication” Enable checkbox

respectively.

NOTE: Generic FreeRADIUS alone is supported.

RADIUS Authentication

Check the option ‘Enable’ to enable RADIUS authentication.

Port

Specify the RADIUS Port.

• - The default Port is 1812.

• - Port value ranges from 1 to 65535.

Time Out

Specify the Time out value.

• - The default Time out value is 3 seconds.

• - Time out value ranges from 3 to 300.

Server Address

Enter the ‘IP address’ of the RADIUS server

• - An IP Address is made of 4 numbers separated by dots as in “xxx.xxx.xxx.xxx”.

• - Each Number ranges from 0 to 255.

• - The first Number must not be 0.

The server address will support the following:

• - IPv4 Address format.