User guide

3.5.10 NTP Settings

This page displays the device’s current Date & Time Settings. It can be used to configure either Date &

Time or NTP (Network Time Protocol) server settings for the device.

Date

Specify the current Date for the device.

Time

Specify the current Time for the device.

NOTE: As a year 2038 problem exists, the acceptable date range is from 01-01-2005 to 01-18-2038.

NTP Server

Specify the NTP Server for the device. Check the ‘Automatically synchronize’ option to configure the

NTP Server. The NTP Server will support the following:

• - IP Address (Both IPv4 and IPv6 format).

• - FQDN (Fully qualified domain name) format.

UTC Offset

UTC Offset list contains the UTC offset values for the NTP server, which can be used to display the

exact local time.

NOTE: Use the correct UTC offset after adjusting for DST.

Automatically synchronize

Check this option to automatically synchronize Date and Time with the NTP Server.

Refresh

Click ‘Refresh’ to reload the current date & time settings.

Save

Click ‘Save’ to save any changes made.

Reset

Click ‘Reset’ to reset the modified changes.