User guide

3.5.9 Network Link Configuration

This page is used to configure the network link configuration for available network interfaces.

LAN Interface

Select the required network interface from the list to which the Link speed and duplex mode is to be

configured.

Auto Negotiation

This option is enabled to allow the device to perform automatic configuration to achieve the best

possible mode of operation (speed and duplex) over a link.

Link Speed

Link speed will list all the supported capabilities of the network interface. It can be 10/100/1000

Mbps.

Duplex Mode

Select any one of the following Duplex Modes.

• - Half Duplex

• - Full Duplex

Save

Click ‘Save’ to save the settings.

Reset

Click ‘Reset’ to reset the modified changes.