Quick Start Manual
58
2.9.2 Image Transfer Protocol
This page is used to congure the rmware image protocol information.
Protocol Type
Protocol type to transfer the rmware image into the BMC.
Server Address
The Server IP address of the rmware image is stored.
• - An IP Address is made of 4 numbers separated by dots as in
“xxx.xxx.xxx.xxx”.
• - Each number ranges from 0 to 255.
• - The rst number must not be 0.
Source Path
Full Source path with lename of where the rmware image is stored.
Retry Count
Number of time(s) to be retried when transfer failure occurs. Retry count
ranges from 0 to 255.
Save
Click ‘Save’ to save the congured settings.