Owner's Manual

28
Fan Control
In the Fan Control section, there are
two major chapters: Temperature
and CPU/Chassis/Power Fan. In
Temperature, it shows the major
readings of CPU and motherboard
temperature. In CPU/Chassis/Power
Fan, it shows the fan target speed
and temperature, and you are able to
adjust the setting by clicking the “+/-”
and confi rm by “APPLY” afterward.
Overclocking
In the Overclocking section, there
are Clock and Voltage chapters
for parameter settings adjustment
in pursuit of optimal system
performance. You are able to fine-
tune the CPU ratio, CPU frequency,
and respective voltages by clicking
the “+/-” at the display panel. After
confirmation of the settings, please
click on the “APPLY” button.
Overclocking and over-voltage may affect your system stability, or even
cause damage to your hardware devices. It should be done at your own
risk and expense. ASRock is not responsible for possible damage caused
by overclocking and and overvoltage. If system hangs after overclocking,
please remove AC power cord and plug AC power cord again before you
power on your system.