Copyright Notice: No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Motherboard LLayout ayout 1 2 3 4 5 6 7 English 8 9 10 11 12 13 14 PS2_USB_PWR1 Jumper ATX 12V Connector (ATX12V1) CPU Fan Connector (CPU_FAN1) 775-Pin CPU Socket North Bridge Controller Clear CMOS Jumper (CLRCMOS1) 2 x 240-pin DDRII DIMM Slots (Dual Channel: DDRII_1, DDRII_3; Yellow) South Bridge Controller IDE1 Connector (IDE1, Blue) Chassis Speaker Header (SPEAKER 1) System Panel Header (PANEL1) Fourth SATAII Connector (SATAII_4; Orange) Secondary SATAII Connector (SATAII_2; Red) Third SATAII Connect
HD 8CH I/O 1 2 3 4 5 6 *7 Parallel Port RJ-45 Port Side Speaker (Gray) Rear Speaker (Black) Central / Bass (Orange) Line In (Light Blue) 8 9 10 11 12 13 Microphone (Pink) USB 2.0 Ports (USB01) USB 2.0 Ports (USB23) VGA Port PS/2 Keyboard Port (Purple) PS/2 Mouse Port (Green) Front Speaker (Lime) * If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use.
1. Introduction Thank you for purchasing ASRock ConRoe1333-D667 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. This Quick Installation Guide contains introduction of the motherboard and step-bystep installation guide. More detailed information of the motherboard can be found in the user manual presented in the Support CD.
Specifications Platform CPU Chipset Memory Hybrid Booster Expansion Slot Graphics Audio LAN Rear Panel I/O - Micro ATX Form Factor: 9.6-in x 9.6-in, 24.4 cm x 24.
Connector BIOS Feature Support CD Hardware Monitor OS Certifications - 4 x SATAII 3.0 Gb/s connectors (No Support for RAID and “Hot Plug” functions) (see CAUTION 11) - 1 x ATA100 IDE connector (supports 2 x IDE devices) - 1 x Floppy connector - 1 x IR header - 1 x COM port header - CPU/Chassis FAN connector - 20 pin ATX power connector - 4 pin 12V power connector - CD in header - Front panel audio connector - 2 x USB 2.0 headers (support 4 USB 2.
CAUTION! 2. 3. 4. 5. 6. 7. 8. 9. FSB1333-CPU will operate in overclocking mode. Under this situation, PCIE frequency will also be overclocked to 115MHz. About the setting of “Hyper Threading Technology”, please check page 28 of “User Manual” in the support CD. This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 20 for details. This motherboard supports Dual Channel Memory Technology.
1.3 Minimum Hardware R equirement TTable able for W indows ® Requirement Windows Vista TM Premium 2007 and Basic Logo For system integrators and users who purchase this motherboard and plan to submit Windows® VistaTM Premium 2007 and Basic logo, please follow below table for minimum hardware requirements. CPU Memory VGA Celeron D 326 512MB x 2 Dual Channel (Premium) 512MB Single Channel (Basic) 256MB x 2 Dual Channel (Basic) DX9.
2. Installation Pre-installation Precautions Take note of the following precautions before you install motherboard components or change any motherboard settings. 1. Unplug the power cord from the wall socket before touching any component. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components. 2. To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like.
Step 1. Open the socket: Step 1-1. Disengaging the lever by depressing down and out on the hook to clear retention tab. Step 1-2. Rotate the load lever to fully open position at approximately 135 degrees. Step 1-3. Rotate the load plate to fully open position at approximately 100 degrees. black line black line Step 2. Insert the 775-LAND CPU: Step 2-1. Hold the CPU by the edges where are marked with black lines. Step 2-2. Orient the CPU with IHS (Integrated Heat Sink) up.
1. It is recommended to use the cap tab to handle and avoid kicking off the PnP cap. 2. This cap must be placed if returning the motherboard for after service. Step 4. Close the socket: Step 4-1. Rotate the load plate onto the IHS. Step 4-2. While pressing down lightly on load plate, engage the load lever. Step 4-3. Secure load lever with load plate tab under retention tab of load lever. 2.
2.3 Installation of Memory Modules (DIMM) ConRoe1333-D667 motherboard provides two 240-pin DDRII (Double Data Rate) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install two identical (the same brand, speed, size and chip-type) memory modules in the DDRII DIMM slots to activate Dual Channel Memory Technology. Otherwise, it will operate at single channel mode. 1. 2.
2.4 Expansion Slots (PCI, HDMR and PCI Express Slots) There are 2 PCI slots, 1 HDMR slot and 2 PCI Express slots on this motherboard. PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface. HDMR slot: HDMR slot is used to insert a HDMR card with v.92 Modem functionality. The HDMR slot is shared with PCI2 slot. PCIE Slots: PCIE1 (PCIE x16 slot) is used for PCI Express cards with x16 lane width graphics cards.
2.5 Jumpers Setup The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and pin2 are “Short” when jumper cap is placed on these 2 pins. Jumper Setting PS2_USB_PWR1 Short Open Description Short pin2, pin3 to enable (see p.2 No. 1) +5VSB (standby) for PS/2 or USB wake up events.
2.6 Onboard Headers and Connectors Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! FDD connector (33-pin FLOPPY1) (see p.2 No. 19) the red-striped side to Pin1 Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector. Primary IDE connector (Blue) (39-pin IDE1, see p.2 No.
USB 2.0 Headers Besides four default USB 2.0 ports on the I/O panel, there are two USB 2.0 headers on this motherboard. Each USB 2.0 header can support two USB 2.0 ports. (9-pin USB6_7) (see p.2 No. 17) (9-pin USB4_5) (see p.2 No. 18) Infrared Module Header This header supports an optional wireless transmitting and receiving infrared module. (5-pin IR1) (see p.2 No. 29) Internal Audio Connector (4-pin CD1) CD1 (CD1: see p.2 No. 23) Front Panel Audio Header (9-pin HD_AUDIO1) (see p.2 No.
F. Enter Windows system. Click the icon on the lower right hand taskbar to enter Realtek HD Audio Manager. Click “Audio I/O”, select “Connector Settings” , choose “Disable front panel jack detection”, and save the change by clicking “OK”. System Panel Header This header accommodates several system front panel functions. (9-pin PANEL1) (see p.2 No. 11) Chassis Speaker Header Please connect the chassis speaker to this header. (4-pin SPEAKER 1) (see p.2 No.
Serial port Header (9-pin COM1) This COM1 header supports a serial port module. (see p.2 No.
2.7 SA SATTAII Hard Disk Setup Guide Before installing SATAII hard disk to your computer, please carefully read below SATAII hard disk setup guide. Some default setting of SATAII hard disks may not be at SATAII mode, which operate with the best performance. In order to enable SATAII function, please follow the below instruction with different vendors to correctly adjust your SATAII hard disk to SATAII mode in advance; otherwise, your SATAII hard disk may fail to run at SATAII mode.
2.8 Serial A ATTA (SA (SATTA) / Serial A ATTAII (SA (SATTAII) Hard Disks Installation This motherboard adopts Intel® ICH7 south bridge chipset that supports Serial ATA (SATA) / Serial ATAII (SATAII) hard disks. You may install SATA / SATAII hard disks on this motherboard for internal storage devices. This section will guide you to install the SATA / SATAII hard disks. STEP 1: Install the SATA / SATAII hard disks into the drive bays of your chassis.
3. BIOS Information The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up the computer, please press during the Power-On-Self-Test (POST) to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing + + , or pressing the reset button on the system chassis. The BIOS Setup program is designed to be user-friendly.
ASRock ConRoe1333-D667 Motherboard
® ® ® ® ® ® ® ® ® ® 23 ASRock ConRoe1333-D667 Motherboard
® ® 24 ASRock ConRoe1333-D667 Motherboard
® ® ® ® ® ® ® ® ® ® ® 25 ASRock ConRoe1333-D667 Motherboard
® ® ® ® ® 26 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
SATAII_3 SATAII_4 SATAII_1 SATAII_2 33 ASRock ConRoe1333-D667 Motherboard
CD1 34 ASRock ConRoe1333-D667 Motherboard
1 2 3 4 35 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
® 37 ASRock ConRoe1333-D667 Motherboard
® ® 38 ASRock ConRoe1333-D667 Motherboard
X O O O O O X O O O O O O: X: 39 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
® ® ® ® ® ® ® ® ® ® 41 ASRock ConRoe1333-D667 Motherboard
® 42 ASRock ConRoe1333-D667 Motherboard
“ ” ® ® ® ® ® ® “ ® ® ® ® 43 ASRock ConRoe1333-D667 Motherboard
® ® ® “ ” ® ® 44 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
Pin1 Pin1 46 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
“ ” 49 ASRock ConRoe1333-D667 Motherboard
“ ” “ “ ” ” “ ” 50 ASRock ConRoe1333-D667 Motherboard
SATAII_3 SATAII_4 SATAII_1 SATAII_2 51 ASRock ConRoe1333-D667 Motherboard
CD1 52 ASRock ConRoe1333-D667 Motherboard
1 2 3 4 53 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
® “ ” 56 ASRock ConRoe1333-D667 Motherboard
“ ” “ \ ” \ 57 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
® ® ® ® ® ® ® ® ® ® 59 ASRock ConRoe1333-D667 Motherboard
® ® ® 60 ASRock ConRoe1333-D667 Motherboard
“ ” ® ® ® ® ® ® 61 ASRock ConRoe1333-D667 Motherboard
® ® TM TM ® ® TM TM ® ® ® TM TM TM ® TM ® ® 62 ASRock ConRoe1333-D667 Motherboard ®
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
SATAII_3 SATAII_4 SATAII_1 SATAII_2 69 ASRock ConRoe1333-D667 Motherboard
CD1 70 ASRock ConRoe1333-D667 Motherboard
1 2 3 4 71 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
® 73 ASRock ConRoe1333-D667 Motherboard
ASRock ConRoe1333-D667 Motherboard
® TM ® TM 75 ASRock ConRoe1333-D667 Motherboard