Installation guide

6
Way 2
:
(for Windows
®
8 64-bit / 8.1 64-bit only)
Create and configure the RAID disk in GPT mode to support RAID disk size over 2TB and speed up system boot time.
STEP 1: Set up UEFI
A. Enter UEFI SETUP UTILITY → Advanced screen → Storage Configuration.
B. Set the “SATA Mode” option to <RAID>.
C. Set the “Onboard RAID 3TB+ Unlocker” option to <UEFI Mode For GPT Partition >.
D. Click <F10> to save and exit.
E. Click <F11> to enter boot menu and select “Built-in EFI shell”.
F. At the Shell> prompt, enter the command “drvcfg” and click <Enter>.
G. When the following screen appears, enter “dh <Drv number>” and click <Enter>.
H. Enter “drvcfg(space)-s(space)<Drv number>(space)<Ctrl number>” and click <Enter> to access RAID Utility.