User manual
Table Of Contents
- RAIDXpert User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Setup
- Chapter 4: RAIDXpert User Interface
- Chapter 5: Monitoring and Managing
- Logging into RAIDXpert
- Choosing a Language
- Logging out of RAIDXpert
- User Management
- Host Management
- Utility Configuration
- Controller
- Physical Drives
- Logical Drives
- Viewing Logical Drives
- Creating a Logical Drive
- Deleting a Logical Drive
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Backing up a RAID Ready Logical Drive
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing All Logical Drives
- Synchronizing One Logical Drive
- Initializing a Logical Drive
- Logical Drive Activation
- Managing a Critical or Offline Logical Drive
- Spare Drives
- Chapter 6: Technology Background
- Appendix A: Frequently Asked Questions
- Appendix B: Partition and Format
RAIDXpert User Manual
74
Canceling a Schedule
If you want to cancel the scheduled Migration, do the following:
1. Click Logical Drive View in Tree View.
2. Click the Logical Drive whose schedule you want to cancel.
3. Click the Migration tab in Management View.
4. Click the Disable option.
Rebuilding a Logical Drive
Rebuild refers to the process of repairing a logical drive by reconstructing the
data on one of its physical drives. This feature only applies to logical drives with
redundancy: RAID 1, 5, and 10.
Rebuilding requires a spare drive or a Single Disk of equal or greater capacity as
the failed physical drive. See “Managing a Critical or Offline Logical Drive” on
page 84.