User manual
Table Of Contents
- RAIDXpert User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Setup
- Chapter 4: RAIDXpert User Interface
- Chapter 5: Monitoring and Managing
- Logging into RAIDXpert
- Choosing a Language
- Logging out of RAIDXpert
- User Management
- Host Management
- Utility Configuration
- Controller
- Physical Drives
- Logical Drives
- Viewing Logical Drives
- Creating a Logical Drive
- Deleting a Logical Drive
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Backing up a RAID Ready Logical Drive
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing All Logical Drives
- Synchronizing One Logical Drive
- Initializing a Logical Drive
- Logical Drive Activation
- Managing a Critical or Offline Logical Drive
- Spare Drives
- Chapter 6: Technology Background
- Appendix A: Frequently Asked Questions
- Appendix B: Partition and Format
Chapter 5: Monitoring and Managing
63
3. Select the option beside the RAID level you want for your logical drive.
RAIDXpert displays the RAID levels you can use with the available physical
drives. See page 101 for information about the available RAID levels.
4. In the Select Drive Type screen, click the option for one of the following:
• Single Disk(s) – Selects single disks (unassigned physical drives)
• Logical Drive – Select the Free portion of physical drives whose other
portion is assigned to a Logical Drive
The available choices depend on the RAID level you selected and the
physical drives available.
5. Click the Next button.
The Select Drives screen appears.