User manual
Table Of Contents
- RAIDXpert User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Setup
- Chapter 4: RAIDXpert User Interface
- Chapter 5: Monitoring and Managing
- Logging into RAIDXpert
- Choosing a Language
- Logging out of RAIDXpert
- User Management
- Host Management
- Utility Configuration
- Controller
- Physical Drives
- Logical Drives
- Viewing Logical Drives
- Creating a Logical Drive
- Deleting a Logical Drive
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Backing up a RAID Ready Logical Drive
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing All Logical Drives
- Synchronizing One Logical Drive
- Initializing a Logical Drive
- Logical Drive Activation
- Managing a Critical or Offline Logical Drive
- Spare Drives
- Chapter 6: Technology Background
- Appendix A: Frequently Asked Questions
- Appendix B: Partition and Format

RAIDXpert User Manual
16
4. If you want to change the default password, type the new password into the
New Password field.
Use up to 8 letters and numbers but no spaces or other characters.
5. Type the same password into the Retype Password field.
6. If you plan to set up Event Notification, type the Administrator’s email
address in the Email field.
7. Click the Submit button.
If the action was successful, the Management Window will display the
message “Update Success.”
8. If you plan to set up Event Notification, click the Settings tab.
The image above was shortened to fit on this page.
9. Check the boxes of the notification events that you want to have reported to
you via email and popup messages.
To select events by their severity, check one of the four Select Events boxes
at the top of the window.
10. Click the Submit button.
For more information about Event Notification, see page 36.