User manual
Table Of Contents
- RAIDXpert User Manual
- Contents
- Chapter 1: Introduction
- Chapter 2: Installation
- Chapter 3: Setup
- Chapter 4: RAIDXpert User Interface
- Chapter 5: Monitoring and Managing
- Logging into RAIDXpert
- Choosing a Language
- Logging out of RAIDXpert
- User Management
- Host Management
- Utility Configuration
- Controller
- Physical Drives
- Logical Drives
- Viewing Logical Drives
- Creating a Logical Drive
- Deleting a Logical Drive
- Viewing Logical Drive Information
- Making Logical Drive Settings
- Backing up a RAID Ready Logical Drive
- Migrating a Logical Drive
- Rebuilding a Logical Drive
- Synchronizing All Logical Drives
- Synchronizing One Logical Drive
- Initializing a Logical Drive
- Logical Drive Activation
- Managing a Critical or Offline Logical Drive
- Spare Drives
- Chapter 6: Technology Background
- Appendix A: Frequently Asked Questions
- Appendix B: Partition and Format
RAIDXpert User Manual
94
Introduction to RAID
RAID (Redundant Array of Independent Disks) allows multiple physical drives to
be combined together in a logical drive. The operating system sees the logical
drive as a single storage device, and treats it as such. The RAID software and/or
controller handle all of the individual drives on its own. The benefits of a RAID
can include:
• Higher data transfer rates for increased server performance
• Increased overall storage capacity for a single drive designation (such as, C,
D, E, etc.)
• Data redundancy/fault tolerance for ensuring continuous system operation in
the event of a hard drive failure
Different types of logical drives use different organizational models and have
varying benefits. Also see Choosing RAID Level on page 101. The following
outline breaks down the properties for each type of RAID logical drive: