User manual

3030
3030
30
3.3.23.3.2
3.3.23.3.2
3.3.2
Chipset ConfigurationChipset Configuration
Chipset ConfigurationChipset Configuration
Chipset Configuration
OnBoard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard UAA Audio
Select [Auto], [Enabled] or [Disabled] for the onboard UAA Audio feature. If
you select [Auto], the onboard UAA Audio will be disabled when PCI Sound
Card is plugged.
AGP Data Rate
Use this item to adjust the AGP Data Rate. Configuration options: [8X], [4X].
The default value is [8X].
AGP Aperture Size
It refers to a section of the PCI memory address range used for graphics
memory. It is recommended to leave this field at the default value unless the
installed AGP card’s specifications requires other sizes. Configuration
options: [32MB], [64MB], [128MB], [256MB], and [512MB].
AGP Fast Write
This allows you to enable or disable the feature of AGP fast write protocol
support.
AGP SideBand Address
This allows you to enable or disable the feature of AGP SideBand Address.
Configuration options: [Enabled], and [Disabled].
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers. The default value of this feature is [PCI]. Configuration
options: [PCI] and [AGP].
CPU - NB Link Speed
This feature allows you selecting CPU to NB link frequency. Configuration
options: [Auto], [200 MHz], [400 MHz], [600 MHz], and [800 MHz].
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Settings
OnBoard UAA Audio
OnBoard LAN
AGP Data Rate
AGP Aperture Size
AGP Fast Write
AGP SideBand Address
Primary Graphics Adapter
CPU-NB Link Speed
CPU-NB Kink Width
[Enabled]
[Auto]
[4X]
[64MB]
[Disabled]
[Enabled]
[PCI]
[Auto]
[Auto]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Advanced
DRAM Voltage
[Auto]
To set DRAM Voltage.
AGP Voltage
[Auto]