User manual

2828
2828
28
BIOS SETUP UTILITY
CPU Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Advanced
Select Screen
Select Item
+- Change Option
F1 General Help
F9 Load Defaults
F10 Save and Exit
ESC Exit
CPU Frequency (MHz)
AGP Frequency (MHz)
AM2 Boost
Overclock Mode
[200]
[66]
[Disabled]
[Auto]
Spread Spectrum
Cool'n'Quiet
Dual Core Support
[Auto]
[Enabled]
[Enabled]
Boot Failure Guard
[Enabled]
If AUTO, multiplier and
voltage will be left at the
rated frequency/voltage. If
Manual,
will be set based
on User Selection in Setup.
multiplier and
voltage
Processor Maximum Multiplier
Processor Maximum Voltage
x11
1.550 V
Multiplier/Voltage Change
[Manual]
Processor Multiplier
Processor Voltage
[x8]
[1.500V]
Memory Clock
Flexibility Option
CAS Latency (CL)
TRAS
[Auto]
[Auto]
[Auto]
[Disabled]
Processor Multiplier
This item will show when “Multiplier/Voltage Change” is set to [Manual];
otherwise, it will be hidden. The range of the value depends on the CPU
you adopt on this motherboard. However, for system stability, it is not
recommended to adjust the value of this item.
Processor Voltage
This item will show when “Multiplier/Voltage Change” is set to [Manual];
otherwise, it will be hidden. The range of the value depends on the CPU
you adopt on this motherboard. However, for safety and system stability,
it is not recommended to adjust the value of this item.
AGP Frequency (MHz)
Use this option to adjust AGP frequency. The default value is [66].
Boot Failure Guard
Enable or disable the feature of Boot Failure Guard.
Spread Spectrum
This feature will be set to [Auto] as default.
Cool ‘n’ Quiet
Use this item to enable or disable AMD’s Cool ‘n’ Quiet
TM
technology.
Dual Core Support
This item will show if you use Dual Core CPU. Configuration optiona: [Enabled],
[Disabled]. The default value is [Enabled].
Processor Maximum Multiplier
It will display Processor Maximum Multiplier for reference.
Processor Maximum Voltage
It will display Processor Maximum Voltage for reference.
Multiplier/Voltage Change
This item is set to [Auto] by default. If it is set to [Manual], you may adjust the
value of Processor Multiplier and Processor Voltage. However, it is recom-
mended to keep the default value for system stability.