User manual

4646
4646
46
BIOS SETUP UTILITY
v02.54 (C) Copyright 1985-2003, American Megatrends, Inc.
Chipset Settings
Onboard LAN
OnBoard UAA Audio
Onboard IEEE 1394
NBCORE Voltage
Primary Graphics Adapter
CPU-NB Link Speed
CPU-NB Link Width
[Enabled]
[PCI]
[Auto]
[Auto]
[Enabled]
[Auto]
[Auto]
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
F9 Load Defaults
Advanced
DRAM Voltage
[Auto]
To set DRAM Voltage.
3.3.23.3.2
3.3.23.3.2
3.3.2
Chipset ConfigurationChipset Configuration
Chipset ConfigurationChipset Configuration
Chipset Configuration
Onboard LAN
This allows you to enable or disable the onboard LAN feature.
OnBoard UAA Audio
Select [Auto], [Enabled] or [Disabled] for the onboard UAA Audio feature. If
you select [Auto], the onboard UAA Audio will be disabled when PCI Sound
Card is plugged.
Onboard IEEE 1394
This allows you to enable or disable the onboard IEEE 1394 feature.
Primary Graphics Adapter
This item will switch the PCI Bus scanning order while searching for video
card. It allows you to select the type of Primary VGA in case of multiple
video controllers. The default value of this feature is [PCI]. Configuration
options: [PCI] and [PCI Express].
CPU - NB Link Speed
This feature allows you selecting CPU to NB link frequency. Configuration
options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz], and [1000
MHz].
CPU - NB Link Width
This feature allows you selecting CPU to NB link width. Configuration options:
[Auto], [8 Bit], and [16 Bit].
DRAM Voltage
Use this to select DRAM voltage. Configuration options: [Auto], [1.85V],
[1.9V], [1.95V], [2.0V] and [2.05V]. The default value is [Auto].
NBCORE Voltage
Use this to select NBCORE voltage. Configuration options: [Auto], [1.5V],
[1.6V], [1.7V], and [1.8V]. The default value is [Auto].