Quick Start Manual

ASRock A75iCafe Motherboard

English

2.10 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place

jumper caps over these headers and connectors. Placing jumper caps

over the headers and connectors will cause permanent damage of the

motherboard!

U SB_PWR

P-8

GND

DUMMY

U SB_PWR

P +8

GND

P-9

P +9

USB 2.0 Headers Besides four default USB 2.0

(9-pin USB6_7)

ports on the I/O panel, there

(see p.2 No. 23)

are two USB 2.0 headers on

this motherboard. Each USB 2.0

header can support two USB

2.0 ports.

(9-pin USB8_9)

(see p.2 No. 22)

Serial ATA2 Connectors These six Serial ATA3

(SATA_1: see p.2, No. 9)

(SATA3) connectors support

(SATA_2: see p.2, No. 10)

SATA data cables for internal

(SATA_3: see p.2, No. 17)

storage devices. The current

(SATA_4: see p.2, No. 18)

SATA3 interface allows up to

(SATA_5: see p.2, No. 21)

6.0 Gb/s data transfer rate.

(SATA_6: see p.2, No. 20)

SATA_5 SATA_6

SATA_3 SATA_4

SATA_1 SATA_2

Serial ATA (SATA) Either end of the SATA data

Data Cable cable can be connected to the

(Optional)

SATA3 hard disk or the SATA3

connector on this motherboard.