User manual

ManualsBrandsASROCK ManualsComputer equipment939Dual-VSTA

3333

BIOS SETUP UTILITY

ACPI Settings

Select auto-detect or

disable the STR

feature.

Select Screen

Select Item

+- Change Option

F1 General Help

F9 Load Defaults

F10 Save and Exit

ESC Exit

Advanced

Suspend To RAM

Repost Video on STR Resume

Restore on AC / Power Loss

Ring-In Power On

PCI Devices Power On

PS / 2 Keyboard Power On

RTC Alarm Power On

ACPI HPET Table

[Auto]

[No]

[Power Off]

[Disabled]

3.3.33.3.3

3.3.3

ACPI ConfigurationACPI Configuration

ACPI Configuration

CPU - NB Link Speed

This feature allows you selecting CPU to NB link frequency. Configuration

options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz], and [1000

MHz].

CPU - NB Link Width

This feature allows you selecting CPU to NB link width. Configuration options:

[Auto], [8 BIT], and [16 BIT].

NB - SB Link Speed

This feature allows you selecting NB to SB link frequency. Configuration

options: [Auto], [200 MHz], [400 MHz], [600 MHz], [800 MHz], and [1000

MHz].

NB - SB Width

This feature allows you selecting NB to SB link width. Configuration options:

[Auto], [8 BIT], and [16 BIT].

HTTtoPCI Bridge Decode Scheme

Use this to select HTT to PCI bridge decode scheme. Configuration options:

[Auto], [Positive], and [Subtractive].

Gated Clock Function

You can enable or disable gated clock function. Configuration options:

[Enabled], [Disabled].

DRAM Voltage

Use this to select DRAM voltage. Configuration options: [Auto], [Low],

[Normal], [High]. The default value is [Auto].

North Bridge Voltage

Use this to select north bridge voltage. Configuration options: [Auto],

[Normal], [High]. The default value is [Auto].

South Bridge Voltage

Use this to select south bridge voltage. Configuration options: [Auto],

[Normal], [High]. The default value is [Auto].