User manual

ManualsBrandsASROCK ManualsComputer equipment939Dual-VSTA

3232

TRP

Use this to adjust TRP values. Configuration options: [Auto], [2CLK], [3CLK],

[4CLK], [5CLK], and [6CLK].

MA Timing

Use this to adjust values for MA timing. Configuration options: [Auto], [2T],

[1T]. The default value is [Auto].

3.3.23.3.2

3.3.2

Chipset ConfigurationChipset Configuration

Chipset Configuration

OnBoard LAN

This allows you to enable or disable the onboard LAN feature.

OnBoard UAA Audio

Select [Auto], [Enabled] or [Disabled] for the onboard UAA Audio feature. If

you select [Auto], the onboard UAA Audio will be disabled when PCI Sound

Card is plugged.

AGP Aperture Size

It refers to a section of the PCI memory address range used for graphics

memory. It is recommended to leave this field at the default value unless the

installed AGP card’s specifications requires other sizes. Configuration

options: [32MB], [64MB], [128MB], and [256MB].

AGP Data Rate

Use this item to adjust the AGP Data Rate. Configuration options: [8X], [4X].

AGP Fast Write

This allows you to enable or disable the feature of AGP fast write protocol

support.

Primary Graphics Adapter

This item will switch the PCI Bus scanning order while searching for video

card. It allows you to select the type of Primary VGA in case of multiple

video controllers. The default value of this feature is [PCI]. Configuration

options: [PCI], [PCIE] and [AGP].

BIOS SETUP UTILITY

Chipset Settings

OnBoard UAA Audio

OnBoard LAN

AGP Aperture Size

AGP Data Rate

AGP Fast Write

Graphics Adapter

CPU - NB Link Speed

CPU - NB Link Width

NB - SB Link Speed

NB-SB Width

HTTtoPCI Bridge Decode Scheme

Primary

Gated Clock Function

DRAM Voltage

North Bridge Voltage

South Bridge Voltage

[Enabled]

[64MB]

[Disabled]

[PCI]

[Auto]

[4X]

[Auto]

[Disabled]

[Auto]

Select Screen

Select Item

+ - Change Option

F1 General Help

F10 Save and Exit

ESC Exit

F9 Load Defaults

Enable/Disable onboard

Audio device.

Advanced