User`s manual

USB Conguration

Help Item

Module Version - 2.24.3-13.4 Enables support for

legacy USB. AUTO

USB Devices Enabled :

option disables

1 Drive legacy support if

no USB devices are

Legacy USB Support [Enabled] connected.

OnBoard USB Controller [Enabled]

USB 2.0 Controller [Enabled]

► USB Storage Configuration

[Press Enter]

↑↓←→:Move Enter:Select +/-/:Value F10:Save ESC:Exit

F1:General Help F9:Optimized Defaults

[Enabled]

► Legacy USB Support

This item is used to enable the support for USB devices on legacy OS. If you have a USB

keyboard or mouse, set to auto or enabled.

► OnBoard USB Controller

This item is used to enable or disable the onboard USB controller.

► USB 2.0 Controller

This item is used to enable or disabled the enhanced host controller interface for USB.

If USB devices are connected to the computer, the following item will appear:

► USB Storage Configuration

After pressing <Enter>, you can set the reset delay for the USB mass storage device. There

are many different emulation types of this USB device, such as oppy, hard disk and CDROM

can be selected.