EMOxxx user manual 1_6

When connected to the rover, pressure and elevation graphs are absolute readings until a
datum is set. The range corresponding to 0 on the graphs is shown in brackets in each title.
The buttons on the bottom top row will be labeled NetID (x) where x is the current NetID and
NodeID (y) where y is the current NodeID. To set a new NetID or NodeID enter it into the
corresponding text box and click the button. In this mode the Ping button is enabled. Type in a
NodeID to ping on the same NetID and click the Ping button. After the Ping button is clicked it
will change to Datum if telemetry is received and the graphs will update accordingly. The
current Units can be changed on the bottom. The Reset button to the right will clear the graphs.