EMOxxx user manual 1_6

Absolute readings for available base telemetry can be viewed by choosing the Base NodeID
using the NodeID combo box. To set the Elevation Datum enter it into the text box and click the
Datum button. After the Datum button is clicked it will change to Adjust (x) where x is the
current Elevation Residual as an average deviation from the preset datum, do not move the
units during the calibration. To set the Elevation Datum click the Adjust (x) button and the
label will change to Datum (y) where y is the current Elevation Datum and differential data will
be displayed. The Reset button to the right will clear the graphs and return to absolute mode.
The Resume button will continue with the previously defined differential solution.