Technical information

Chapter 3 63
Removing the Hinge Covers
1. See “Removing the Battery Pack” on page 49.
2. Remove the two screw caps and screws from the Hinge Covers.
3. Slide the covers off the hinges in the direction of the arrows.
IMPORTANT:The left and right Hinge Covers are shaped differently and marked L and R on the inside. Ensure
that the correct cover is used during reassembly.
Removing the Switch Cover
CAUTION: Using tools to remove the Switch Cover may cause damage to the outer casing. It is
recommended that only fingers are used to remove the Switch Cover.
1. See “Removing the Battery Pack” on page 49.
Modem Module M2*3 2 86.AD302.001
BT Module M2.5*3 1 86.AD302.002
Mainboard M2.5*3 1 86.AD302.002
Thermal Module M2.5*5*3.2 4 86.AD302.006
Step Size Quantity Screw Type
Hinge Covers M2.5*4 2
Step Screw Quantity Part No.