User Manual

INSTALLATION

CLEARANCES

TO NON-COMBUSTIBLE CONSTRUCTION

A minimum of 4” (10 cm) clearance from the back of the grill to non-combustible construction is required

to allow the hood to be opened fully.

TO COMBUSTIBLE CONSTRUCTION

This appliance should NOT be installed over, under or next to unprotected combustible construction. If

your enclosure (island) is combustible, then an insulated jacket manufactured by Hestan is required. See

INSULATED JACKET dimensions below to make allowances in your enclosure for this item. A minimum

clearance to vertical combustible material is 12” (30 cm) on the sides and the rear of the appliance.

The minimum vertical clearance to combustible materials means that ALL combustible materials must be

outside this 12” (30 cm) zone. As an example, if you have an island with a stucco or tiled surface and wood-

frame construction beneath, the wood is considered combustible, even though the grill is touching the

stucco or tile surface, which is non-combustible. In extreme circumstances, the wood could potentially get

hot enough to burn.

VENTILATION OPENINGS

A minimum of three 10 in² (65 cm²) of ventilation openings must be provided for both left and right sides

of your enclosure (island), as well as the back. These openings are required to safely dissipate gas vapors if

there is a leak in your enclosure.

BUILT-IN DIMENSIONS