Operation Manual

A
BOUT
EFP
ANEL
C
ONTROL
S
OFTWARE
ASPI Digital -
The Sound of DSP
Technical Support: 404.892.3200 A-3
A
BOUT
EFP
ANEL
C
ONTROL
S
OFTWARE
I
NSTALLING
EFP
ANEL
Install EFPanel by copying the executable (EFPanel.exe) onto your hardrive.
Connect an RS-232 cable (see the EF1210 User Manual or the EF200 User Manual
for connector pinouts) from the COM port on your computer to the RS-232 port on
the EF device. If you would like to control more than one EF device in your system,
use a category five twisted pair cable to connect the devices using the ASPI Bus.
G
ETTING
S
TARTED
After installing EFPanel, start the executable. When the program is first started, you
may initially only see 3 tabs on the application — the Serial Port, Traffic
and About pages. Go to the Serial Port page by clicking on the tab labeled
Serial Port. Choose the appropriate COM port for your computer.
EFP
ANEL
F
EATURES FOR ALL
EF D
EVICES
The following feature descriptions apply to EFPanel for all EF Devices. Following
this section are discussions of specific features that pertain only to specific EF
Devices.
Note.
This control software and manual may be changed and updated
periodically, so please visit our website at http://www.aspi.com for
the most recent versions.