Operation Manual

EF1210 U

SER

ANUAL

ERROR# -

ERROR

MESSAGE

The error messages report errors that the EF1210 encounters. These are usually com-

mand syntax errors. The errors are numbered, and the meaning of each error number

is described below. Error messages are enabled or disabled with the ERROR com-

mand and must be enabled for this message to be sent.

Remote Commands

The ERROR# command should not be sent to the EF1210. It’s only used as a mes-

sage from the EF1210.

EF1210 Messages

The following messages are sent by the EF1210 when it has an error.

Example

In the following example, the remote control device tries to send a few invalid com-

mands to the EF1210 with Device ID 6. The EF1210 returns an error message in

response to each of these commands. Error messages are enabled.

EF1210 Message Message meaning

ERROR#01 Unknown command.

ERROR#02 Invalid command data.

Remote Command EF1210 Message

C06CHEESE C06ERROR#01

C06PHONE@#$% C06ERROR#02