Operation Manual

EF1210 C
OMMAND
S
ET
R
EFERENCE
ASPI Digital - The Sound of DSP Technical Support: 404.892.3200 81
SWVER -
REQUEST SOFTWARE VERSION
The SWVER command requests the software version of the EF1210.
Remote Commands
The following commands can be sent by the remote control device to request the soft-
ware version of the device.
EF1210 Messages
The following message is sent by the EF1210 in response to a SWVER? command,
indicating its software version.
Example
In the following example, the remote control device requests the software version of
the EF1210 with Device ID number 12.
Remote Command Effects
SWVER? Request the software version of the EF1210.
EF1210 Message Message meaning
SWVERxx.yy The EF1210 software version is xx.yy.
xx denotes a major revision.
yy denotes a minor revision.
Remote Command EF1210 Message
C12SWVER? C12SWVER1.00