Operation Manual

EF1210 U

SER

ANUAL

REFASGN

- AEC

REFERENCE

ASSIGNMENT

The REFASGN

command assigns reference c to input channel n of the EF1210.

The factory default setting for REFASGN

is A (Reference Input A).

Remote Commands

The following commands can be sent by the remote control device to change the ref-

erence channel assignment.

EF1210 Messages

The following messages are sent by the EF1210 in response to an REFASGN

? com-

mand, or in response to any REFASGN

command when acknowledgment mode is

on.

Example

In the following example, the remote control device requests the reference channel

assigned to channel 1 and channel 2 on the EF1210 with Device ID number 7. Then it

assigns Reference A to channel 2 of the same EF1210. Acknowledgment mode is

enabled.

Remote Command Effects

REFASGN

c Assign reference c to channel n.

c ranges either A or B.

n ranges from 1 to 8.

REFASGN

? Request reference assignment of channel n.

Note.

The wildcard character (*) is not allowed for specifying the chan-

nel number n for the REFASGNnc command.

EF1210 Message Message meaning

REFASGN

Reference c is assigned to channel n.

c is either A or B.

n ranges from 1 to 8.

Remote Command EF1210 Message

C07REFASGN1? C12REFASGN1A

C07REFASGN2? C12REFASGN2B

C07REFASGN2A C12REFASGN2A