Operation Manual
EF1210 U
SER
M
ANUAL
70 http://www.aspi.com Copyright © 1999, All Rights Reserved
MUTEI
N
-
ENABLE
/
DISABLE
MUTE
ON
MICROPHONE
INPUT
CHANNEL
N
The MUTEI
n
command mutes the microphone input channel n of the EF1210.
The factory default setting for MUTEI
n
is 0 (not muted).
Remote Commands
The following commands can be sent by the remote control device to mute or unmute
the microphone input channel n of the EF1210.
EF1210 Messages
The following messages are sent by the EF1210 in response to a MUTEI
n
? com-
mand, or in response to any MUTEI
n
command when acknowledgment mode is on.
Example
In the following example, the remote control device unmutes all channels on the
EF1210 with Device ID number 12. Then it mutes the microphone input on channel 4
and requests the mute status on channel 6 of the same EF1210. Acknowledgment
mode is enabled.
Remote Command Effects
MUTEI
n
0 Unmute microphone input channel n.
n ranges from 1 to 8.
MUTEI
n
1 Mute microphone input channel n.
MUTEI
n
2 Toggle mute on or off for microphone input chan-
nel n.
MUTEI
n
? Request mute status of microphone input channel
n.
EF1210 Message Message meaning
MUTEI
n
0 Mute is disabled on microphone input channel
n
.
MUTEI
n
1 Mute is enabled on microphone input channel n.
Note.
It is possible to use a wildcard (*) for setting MUTEIn to 0 or 1
(turning on/off), but not for querying or toggling.
Remote Command EF1210 Message
C12MUTEI*0 C12MUTEI*0
C12MUTEI41 C12MUTEI41
C12MUTEI5? C12MUTEI50