Operation Manual

EF1210 C
OMMAND
S
ET
R
EFERENCE
ASPI Digital - The Sound of DSP Technical Support: 404.892.3200 69
LOCKFP -
LOCK
/
UNLOCK FRONT PANEL
The LOCKFP command locks the front panel buttons of the EF1210 so that they have
no effect.
The factory default setting for LOCKFP is 0 (unlocked).
Remote Commands
The following commands can be sent by the remote control device to lock or unlock
the front panel of the EF1210.
EF1210 Messages
The following messages are sent by the EF1210 in response to a LOCKFP? com-
mand, or in response to any LOCKFP command when acknowledgment mode is on.
Example
In the following example, the remote control device requests the status of the front
panel buttons of the EF1210 with Device ID number 12. Then it locks the front panel
on the same EF1210. Acknowledgment mode is enabled.
Remote Command Effects
LOCKFP0 Unlock the front panel buttons.
LOCKFP1 Lock the front panel buttons.
LOCKFP2 Toggle between locked and unlocked.
LOCKFP? Request status of front panel lock.
EF1210 Message Message meaning
LOCKFP0 Front panel buttons are currently unlocked.
LOCKFP1 Front panel buttons are currently locked.
Remote Command EF1210 Message
C12LOCKFP? C12LOCKFP0
C12LOCKFP1 C12LOCKFP1