Operation Manual

EF1210 U
SER
M
ANUAL
60 http://www.aspi.com Copyright © 1999, All Rights Reserved
EF1210 Messages
The following messages are sent by the EF1210 in response to an AECS
n ? command,
or in response to any AECS command when acknowledgment mode is on.
Example
In the following example, the remote control device sets the suppression mode to nor-
mal on all channels on the EF1210 with Device ID number 7. Then it sets the sup-
pression mode on channel 2 to aggressive and requests the suppression mode status
on channel 6 of the same EF1210. Acknowledgment mode is enabled.
EF1210 Message Message meaning
AECS
n 0 Suppression mode is currently normal on channel
n.
AECS
n 1 Suppression mode is currently aggressive on chan-
nel n.
Remote Command EF1210 Message
C07AECS*0 C07AECS*0
C07AECS21 C07AECS21
C07AECS6? C07AECS60