Operation Manual

A
DVANCED
I
NSTALLATION
ASPI Digital - The Sound of DSP Technical Support: 404.892.3200 37
Caution!
Do not use any other power supply other than the one provided
with this unit.
Caution!
Failure to use all four screws to attach the EF1210 to the rack
may result in uneven loading and cause a safety hazard.
Caution!
Ensure that the power supply is securely located such that it can-
not become dislodged and fall. Such a fall could cause personal
injury or equipment failure.
Caution!
When mounting an EF1210 in a rack, consideration should be
given to airflow and operating ambient temperatures inside the
rack. To ensure safe operation of the EF1210, ambient operating
temperatures inside the rack should not exceed 50 degrees Cel-
sius. Allow 2 inches of open space in front of the EF1210, two
inches on either side, and four inches behind the unit for proper
ventilation. Equipment should not be installed in the rack in such
a way as to interfere with the ventilation of the EF1210.
Caution!
The EF1210 enclosure is designed to maintain a 1/4” clearance
above the top of the unit. Do not install or stack EF1210s in such
a way as to defeat this clearance.
Caution!
Do not block the vents on the sides of the EF1210.
Caution!
Consideration should be given to the connection of the equip-
ment to the supply circuit and the effect that overloading of cir-
cuits could have an overcurrent protection and supply wiring.
Appropriate consideration of equipment nameplate ratings should
be used when addressing this concern.
Caution!
Reliable earthing of rack-mounted equipment should be main-
tained. Particular attention should be given to supply connections
other than direct connection to the Branch (use of power strips).