Operation Manual

A
DVANCED
I
NSTALLATION
ASPI Digital -
The Sound of DSP
Technical Support: 404.892.3200 15
C
ONFIGURATION
Configure the DIP
Switches
The following is a description of each DIP switch and its function.
Figure 2. DIP Switches on EF1210 Back Panel
Note.
When the DIP switch is down (as shown in the diagram in Figure
2), it is in the OFF position. When the DIP switch is up, it is in the
ON position. The default factory setting for all switches is OFF.
L
INE
L
INE
L
INE
L
INE
L
INE
M
IC
1
P
HANTOM
1
M
IC
2
P
HANTOM
2
D
EVICE
ID 8
D
EVICE
ID 4
D
EVICE
ID 2
D
EVICE
ID 1
D
EVICE
ID 16
M
IC
3
P
HANTOM
3
M
IC
4
P
HANTOM
4
M
IC
5-8
P
HANTOM
5
P
HANTOM
6
P
HANTOM
7
P
HANTOM
8
R
ESERVED
R
ESERVED
ON
S
WITCH
#L
ABEL
F
UNCTION
1 M
IC
1/L
INE
Sets mic or line level for input 1 on the EF1210
2 P
HANTOM
1 Sets phantom power for microphone 1. See Caution below.
3 M
IC
2/L
INE
Sets mic or line level for input 2 on the EF1210.
4 P
HANTOM
2 Sets phantom power for microphone 2. See Caution below.
5 M
IC
3/L
INE
Sets mic or line level for input 3 on the EF1210.
6 P
HANTOM
3 Set phantom power for microphone 3. See Caution below.
7 M
IC
4/L
INE
Sets mic or line level for input 4 on the EF1210.
8 P
HANTOM
4 Sets phantom power for microphone 4. See Caution below.
9 M
IC
5-8/L
INE
Sets microphones 5-8 as a group to accept mic or line level input.
This permits any combination of mic and line level inputs by careful
selection when connecting cables to inputs. Switch 9 in Line position
allows 0-4 microphone inputs; switch 9 in Mic position allows 4-8
microphone inputs.
10 P
HANTOM
5 Sets phantom power for microphone 5. See Caution below.
Table 1: DIP Switch configuration