Operation Manual

EFP
ANEL FOR THE
EF200 P
HONE
A
DD
ASPI Digital -
The Sound of DSP
Technical Support: 404.892.3200 A-17
EFP
ANEL FOR THE
EF200 P
HONE
A
DD
D
IALER
•D
IALER
K
EYPAD
. Use this keypad to dial a phone number, or use the keypad on
a computer keyboard to type the phone number. The phone number that are dial-
ing appears in the status bar of EFPanel.
•F
LASH
. This button works much like the “flash” button on many telephones,
used for call waiting features. When the phone is off-hook, clicking this button
will hang up the EF200 (putting it on-hook), then immediately pick it up again
(off-hook). As this is happening, the P
HONE
C
ONNECT
LED on the EF200 front
panel will turn off (phone on-hook), then turn on again (phone off-hook again).
•R
EDIAL
. This button redials the last phone number that you dialed.
•P
RIVACY
(M
UTE
). This mutes (or unmutes) the audio going to the remote end
and to the phone from the EF200. This has the same effect as the P
RIVACY
but-
ton on the EF200 front panel and will light the P
RIVACY
O
N
LED when enabled.
•P
HONE
B
OOK
. This will take you to the Phone Book page of EFPanel for the
EF200.
•R
EMOTE
C
ONNECTED
/D
ISCONNECTED
. This button connects or disconnects the
audio paths going to and from the remote end. It has the same effect as pushing
the R
EMOTE BUTTON
on the front panel of the EF200.
Figure 29. EF200 Dialer on EFPanel Control Software