Operation Manual

ALIBRATING

THE

EF1210

WITH

EFP

ANEL

ONTROL

OFTWARE

ASPI Digital - The Sound of DSP Technical Support: 404.892.3200 A-15

i. Select the Reference Channel for each Input channel.

ii. Once you have finished the Zone/Reference Setup, click on the Next button at

the bottom of the page to view options for saving the setup settings

AVE

ETUP

ETTINGS

Select Save Option:

• Save to a file. This option saves to a file that can be restored when the

EF1210 is in normal operating mode. From the File menu on the menu

bar, choose Open Configuration File to restore the settings you

saved by choosing this option. You can also save a configuration to file at

Note.

If you are using only one reference signal (Reference A), all

microphones must be configured to use that reference signal. If

you are using two reference signals (Reference A and Reference

B), Input Channel 1 must be associated with Reference A (AEC A)

and Input Channel 8 must be associated with Reference B (AEC

B). The other 6 microphones can be associated with either refer-

ence

Figure 28.

Save Setup Settings