User manual

MEX ASPERA-3
Ref.:
ME-ASP-MA-0002
Issue:
Issue 1 Rev. 4
Date:
15/2/2002
Page:
Page 44 of 58
ASPERA-3 EGSE User Manual
IFSI
CNR
3.2.3.3 CCS Protocol Commands
These commands implement the subset of the CCS protocol [RD1] meaningful to an instrument SCOE.
The command definition file is stored in /Mex/CmdLut/Rpropkt.txt and must not be modified by the
user.
The file is an internal macro definition for CCS commands, the user just use the acronym (first field)
followed (if required by the protocol) by the parameters strings. These strings are separated by spaces
so never use a space inside. The acronyms may be redefined in the user macro file.
ACRONYM intID PDUID PDUsType
CTL_CS_STATUS 4 CTL CS_STATUS
CTL_CS_STOP 10 CTL CS_STOP
TM-D_SPECIF_OND 1 TM-D SPECIF_OND
TM-D_SPECIF_DFD 1 TM-D SPECIF_DFD
TM-D_PAUSE_DFD 0 TM-D PAUSE_DFD
TM-D_STEP_DFD 0 TM-D STEP_DFD
TM-D_CONT_DFD 0 TM-D CONT_DFD
TM-D_SPEED_DFD 1 TM-D SPEED_DFD
TM-D_STOP 0 TM-D STOP
TM_SCOE 7 TM SCOE
COM_STATUS 5 COM STATUS
COM_START 3 COM START
COM_STOP 2 COM STOP
COM_HOLD 2 COM HOLD
COM_CONT 2 COM CONT
TC-R_SYM_TC 3 TC-R SYM_TC
TIME_REPORT 1 TIME REPORT
ERR_PROTOCOL 2 ERR PROTOCOL
ERR_UNKNOWN 2 ERR UNKNOWN
ERR_TIMEOUT 6 ERR TIMEOUT
USER_LOG 1 USER LOG
USER_MMI 1 USER MMI
SEQ 3 SEQ XX