User manual

MEX ASPERA-3
Ref.:
ME-ASP-MA-0002
Issue:
Issue 1 Rev. 4
Date:
15/2/2002
Page:
Page 37 of 58
ASPERA-3 EGSE User Manual
IFSI
CNR
3.1.3.6 Strip_chart Plotter
The strip_chart plotter is enabled as shown in the next figure
The plotted parameters (up to 4) must be defined with the PLOT SCOE internal command.
As an example to plot the main bus current as plot # 0:
PLOT 0 6 0xff 0xff 7 0xff00 0x100 12 0xffff 0 0x7fff
which define:
0 Plotted line # 0 (red)
6 offset 6 words
0xff Mask for packet type
0xff expected packet type is 0xff (used at ILT for internal HK)
7 offset 7 words