Use and Care Manual

OPERATING INSTRUCTIONS
Start Up Instructions
1. Insert the power cord plug into a 120 V AC 60 Hz power outlet. The machine will emit a “B” sound,
indicating that the power is on and the unit is running normally.
2. Press the power button: The rst time you press the button to turn on the fan, it will begin to run in
the third position by default, and the display will show “03”. Press the button again to turn off all
functions and indicators.
3. While the unit is operating in the power on state, press the SET button to select the TIMER mode,
and the indicator light corresponding to the TIMER mode will ash at this time, which indicates that
the timing adjustment mode has been entered. The desired time of the timer can be adjusted by
pressing the “+/-” buttons. 1.5 seconds after stopping the action, the program is locked.
4. While the unit is operating in the power on state, press the SET button to select the Airow mode,
and the indicator light corresponding to the Airow mode will ash (the current settings, such as
COOL, EXHAUST, and CIRCULATE) at this time, which indicates that the airow adjustment mode
has been entered. The desired type of airow can be adjusted by pressing the “+/-” buttons. 1.5
seconds after stopping the action, the program is locked.
5. While the unit is operating in the power on state, press the SET button to select the light selection
mode, and the indicator light corresponding to the light mode will ash (the current settings, such as
LOW, MED, and HI) at this time, which indicates that the light adjustment mode has been entered.
The desired light brightness can be adjusted by pressing the “+/-” buttons. 1.5 seconds after
stopping the action, the program is locked.
6. While the unit is operating in the power on state, press the SET button to select the Speed mode,
and the indicator light corresponding to the Speed mode will ash at this time, which indicates
that the speed adjustment mode has been entered. The desired speed setting can be adjusted by
pressing the “+/-” buttons. 1.5 seconds after stopping the action, the program is locked.
7. While the unit is operating in the power on state, press the SET button to select the Temperature
mode, and the corr
that the temperature adjustment mode has been entered. The desired temperature setting can
be adjusted by pressing the “+/-” buttons. 1.5 seconds after stopping the action, the program is
7
locked. If you want to cancel the Temperature mode, please download “AspenHome” App to
deactivate and more settings.