WiFi Enabled Removable Washable Fan Blades, and Front/Back Grills works with Hey Google
Control your window fan from your smart devices simply by installing the AspenHome app and connecting to your Wi–Fi network. Find “AspenHome” APP in IOS and Android or Scan QR Code to download and enjoy optional scheduling functions & speeds from your smartphone or with voice control through Aspen® Google Assistant or Amazon Alexa.
fumes. 10) Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer 11) Keep unit away from heated surfaces and open flames. 12) WARNING: To Reduce The Risk Of Fire Or Electric Shock, Do Not Use This Fan With Any Solid-State Speed Control Device. 13) DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts.
Always completely secure the battery compartment. If the battery compartment does not close securely, stop using the product, remove the batteries, and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. Dispose of button/coin cell batteries properly. Keeping them away from children. Even used cells may cause injury.
TABLE OF CONTENTS Technical Data....................................................1-2 Installation Instructions...................................... 3-5 Operating Instructions.....................................6-11 User Service / Cleaning Instructions..............12-16 Troubleshooting.............................................
1
TECHNICAL DATA ! READ AND SAVE THESE INSTRUCTIONS THIS FAN IS DESIGNED AND RECOMMENDED FOR USE WITH THE SCREEN IN THE WINDOW Instructions Prior to Operation 1. Carefully unpack and take out the window fan, and carefully remove the PE plastic bag in which it is packaged. 2. Choose a suitable window, and the corresponding slot position of the window fan should not block the air coming in or the air going out. 3. Do not block any air outlets in front of or behind the wall.
INSTALLATION INSTRUCTIONS Airflow Mode Timer (hr) COOL EXHAUST CIRCULATE Speed Temperature Low Med High Set The extender panels can be secured to the fan by simply sliding the extender panels into the grooves located on the left side of the fan.
INSTALLATION INSTRUCTIONS ! BE SURE FAN IS SECURELY INSTALLED IN YOUR WINDOW AT ALL TIMES. DO NOT LEAN OR PUSH ON THE FAN WHILE IT IS IN THE WINDOW Airflow Mode Timer (hr) COOL EXHAUST CIRCULATE Speed Temperature Low Med High Set op en op en clos e clos e For Double-Hung Windows 1. window track. 2. Lower and secure window behind window grabber located on top of Fan.
INSTALLATION INSTRUCTIONS op en Speed Timer (hr) Med Low Airflow Mode High EXHAUST CIRCULATE COOL Set Temperature clos e op en clos e For Vertical, Slider and Casement Windows 1. Position the Fan vertically in the window with the switch facing the center of the opening. 2. 3. Depending on the size of the window opening, adjust the built-in extender screen and/or slide the extender panel to meet the edge of the window. 4.
OPERATING INSTRUCTIONS Airflow Mode Timer (hr) COOL EXHAUST CIRCULATE Speed Temperature Low Med High Set • COOL: indicates that 2 motors are rotating forward [supplying air] • EXHAUST: indicates that 2 motors are rotating in reverse [ventilation] • CIRCULATE: indicates that 1 motor is running forward, 1 motor is running in reverse. Screen light brightness (including indicator light): LED lights that help you visibly keep track of all the setting.
OPERATING INSTRUCTIONS Start Up Instructions 1. Insert the power cord plug into a 120 V AC 60 Hz power outlet. The machine will emit a “B” sound, indicating that the power is on and the unit is running normally. 2. Press the power button: The first time you press the button to turn on the fan, it will begin to run in the third position by default, and the display will show “03”. Press the button again to turn off all functions and indicators. 3.
OPERATING INSTRUCTIONS APP CONTROL Please have a compatible IOS or Android device with WiFi enabled How to connect: 1. Find “AspenHome” APP in IOS and Android or Scan QR Code to download to enjoy optional scheduling functions & speeds from your smartphone 2. Make sure that the device is plugged in and the fan is turned off. Hold the WiFi button for 5 seconds until W 3. Follow the instruction on AspenHome App to set up Fan WiFi connection.
OPERATING INSTRUCTIONS AspenHome APP offers the following features: Set temperature (60F~80F) Modify fan speeds Adjust control panel brightness setting Turn fans on/off Control airflow mode Create schedules to perform multiple functions Voice Control Google Assistant / Amazon Alexa and Aspen® smart window fan work together to help you easily control your smart device(s) by conveniently turning your voice into a remote control for your window fan.
OPERATING INSTRUCTIONS How to: Alexa Please follow the steps below to connect Alexa to your Aspen® Home products: 1. Download our AspenHome app in Android or IOS app market 2. Register AspenHome account in our app 3. Aspen® smart home device(s) must be nearby in order to connect 4. Configure your smart device (Window Fan) with our AspenHome app and set a name, if desired, for your device(s) which will be used in “Window Fan” 5. Log into Amazon Alexa app 6.
OPERATING INSTRUCTIONS How to: Google Assisstant Please follow the steps below to connect Google Assistant on Google Home to your Aspen® home products: 1. Download our AspenHome app in Google Play or App Store 2. Register AspenHome account in our app 3. Aspen® smart home device(s) must be nearby in order to connect 4. Log into Google Home app 5. Select “Add” / “+”, then select “Set up device” 6. Select “Have something already set up?” and search for “Aspen Home” in the search bar 7.
USER SERVICING / CLEANING INSTRUCTIONS Required 1 x CR2025 LITHIUM BATTERY 3V Battery Replacement 1. Remove battery cover from remote control 2. Insert 1 new battery, pressing it firmly into the slot 3. Replace the battery cover and secure it to lock position 1. 2. 5 202 CR 12 3.
USER SERVICING / CLEANING INSTRUCTIONS Follow these instructions to correctly and safely care and maintain your Aspen Smart Window Fan. Please remember: ! ! ! ! ! Always turn off the product and unplug the fan before cleaning or disassembling. Do not allow water to drip on or into the fan motor or other electrical components. Do not use gasoline, thinner or benzene as a cleanser. The surface of the product can be wiped with a soft, clean, damp cloth.
USER SERVICING / CLEANING INSTRUCTIONS Physically replace the fuse 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 14 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 4. Replace fuse. Risk of fire: only use 5 Amp, 125 Volt fuse. 3. Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to remove fuse. 5. Close fuse cover.
USER SERVICING / CLEANING INSTRUCTIONS Fan Blades and Front/Back Grills Removing Instructions Step 4: Open by pulling the safety lock. Step 2: Turn the fan grill until the arrow sign aligns with the unlock position. Step 5: Turn the lock counter-clockwise following the open direction as listed on the lock in order to remove it. op en Step 1: Pull out security locks on both sides. lock open lock Airflow Mode COOL Low op en lock Step 3: Remove the right and left fan grills.
USER SERVICING / CLEANING INSTRUCTIONS Fan Blades and Front/Back Grills Reassembly Instructions Step 1: Securely fasten the blades back together by lining up the arrow sign on the blade with the pegs. Insert the blades until you hear a click to properly secure them. Airflow Mode Med COOL EXHAUST CIRCULATE High Low lock Step 6: Press in the security locks on both sides. clos e Step 5: Turn the fan grill and make sure the arrow sign aligns with the lock position.
TROUBLESHOOTING Malfunction Solution The window fan does not work properly • • • • • The airflow has decreased The remote control does not operate the fan • • Check that the power plug of the window fan is plugged in a 120V AC outlet. Check to make sure that the outlet is not overloaded. Check the power and make sure the window fan is turned on Check the security locks and both fan grills are securely locked. Check to make sure the temperature setting is lower than the room temperature.
TROUBLESHOOTING 18 Malfunction Solution The fan(s) are missing parts • Contact customer service at: service@aspenapplianceinc.com or call 1-877-365-3464 The fan is not secure in my window and moves during operation • Please ensure the bottom edge of the window sash fits into the groove along the top of the fan. Make sure it’s completely secure. Refer to the Window Fan Installation section. My window fan will not fit horizontally in the window • Fan can be installed in vertically or horizontally.
Customer Service: Call 1-877-365-3464 Email service@theaspen.com or visit our website at www.theaspen.
