Specifications

Extensibility 3-37
3-37
Creating the Extension Definition File (EDF)
In order to complete the Kinetic Reaction Extension, you must
create an EDF. This is done through the Extension View Editor.
1. Open the Extension View Editor and open a new EDF by
doing one of the following:
• Select New command under the File menu in the menu
bar
• Use the hot key combination CTRL N
•Click the New File icon
The default View Manager property view appears as shown
below:
2. Click the Objects Manager icon to open the Objects
Manager property view.
3. In the ProgID/CLSID field enter RxnExtn.VinylAc as the
extension ID.
4. Enter an appropriate description for the extension in the
Description field, such as Vinyl Acetate Reaction
Extension as shown in Figure 3.10.
If it has been installed, the Extension View Editor is found in
the same launch point in the Start menu as HYSYS.
Figure 3.9
For more information on
installing and accessing
the View Editor, see
Section 4.1.1 -
Accessing the View
Editor.
New File icon
The file path in
the View File
group may be
different,
depending on
where you
installed HYSYS.
Objects Manager icon